PRODUCTS  >  Capping Machines  >  Spindle Cappers  >  Automatic  >  ASC-6

ASC-6

The KISS Packaging ASC-6 Spindle Capper is based on a heavy duty S.S. Frame and uses an individual motor for each rotating shaft. This unique design eliminates the need for transmissions, belts, pulleys, and universal shafts reducing maintenance to almost zero while increasing the capability and adjustability of the capper to accommodate closures from 5mm – 130 mm with no modifications. Each Spindle is spring loaded to ensure maximum contact time with each closure while decreasing spindle disk wear and eliminating closure scuffing. The Spindle Capper is based on a “C” Frame design and can be used with almost any existing conveyor system.

The ASC-6 Spindle Capper is an Automatic capper that is capable of handling lug and screw type closures and most bottle types including glass, PET, PVC, and other plastics. The Semi-Auto version is ideal for start up operations or retorqueing closures after an Induction Sealer. The Semi-Auto Spindle Capper can be upgraded at any time with a closure orientation assembly to automate the unit.

The ASC-6 Automatic Spindle Capper ships standard with a Centrifugal Bowl closure orientation system for line speeds in excess of 200 cpm but can be upgraded with a Closure Elevator / Orientor increasing line speed to over 300 cpm. Single Gripper Belts are standard and have a tapered container adjustment to accommodate difficult to handle containers. Dual and Double Wide Gripper Belt options are available for higher production rates, torque requirements, or difficult to handle containers.

 Download PDF Spec Sheet ASC-6
ASC-6

  • Heavy Duty S.S. Frame
  • Centrifugal Bowl Cap Orientor
  • Low Maintenance
  • Individual Spindle Speed Settings
  • Intelligent Electronic Torque Control
  • Powered Height Adjust
  • Adjustable Angle Gripper Belts
  • Spring Loaded Spindles

Options Available:
  • Dual or Double Wide Gripper Belts
  • Closure Elevator / Orientor
  • Reversible Spindle Sets
  • Custom Container / Closure Product Handling

(ASC-6)

Dimensions
Height: 94" (2387.6 mm)
Length: 36" (914.4 mm)
Depth: 24" (609.6 mm)

Weight
Approx: 1200 lbs. (544.31 kg)

Capping Speed
200 CPM

Cap Size
Min 10mm / Max 120mm
(Larger size may be achieved
with an upgrade)

Electrical Requirements
110 VAC – 20 Amp
(Hazardous Location or 220 VAC
Upgrade Available)

Air Requirements
120psi @ 2 cfm

Torque Range
1 inch pound to over 90 inch Pounds
(Depending on Options Used)

Cap Types
Screw and Lug Configurations

PRODUCTS  >  Capping Machines  >  Spindle Cappers  >  Automatic  >  ASC-6
Accutek Packaging Equipment Company   Biner Ellison High Speed Packaging Machinery   KISS Packaging   Labelette Labelers   Phase Fire Shrink Technologies  

1399 Specialty Drive, Vista, CA 92081  •  Phone: 760.734.4177 •  Fax: 760.734.4188